PROTECT LINE - WATER-BASED PROTECTIVE VARNISH
PROTECT LINE is an aqueous phase protective varnish that lengthens the life
of lines marked using paint from the TRACING and TRACING PLUS
ranges by improving resistance to heavy traffic.
Apply 1 or 2 coats using a roller, brush or spray.
Waterproofs and protects against stains and dust.
Good resistance to scuffing and scratching.
PROPERTIES
• High dry-extract level (33% +/-2%)
• Appearance: milky white becoming transparent when dry
• Finish: satin
• Quantity required: 15 a 50 m2/l depending on the application surface and dilution
• Drying: 2 to 4 hours
• Time before the surface can be used (traf c-ready): 24 to 48 hours
• Application temperature: +5°C to +30°C
• Density: 1.05
SPECIFICATIONS
Composition
Aqueous dispersion of metallic acrylic resins mixed with a wax emulsion.
White, odourless liquid that can be diluted with water forming a transparent satin- nish coat once dry.
Application method
Manually or using our application equipment (paint roller...) Drying Time: 15 to 20 min
Health and safety
Safety data sheets are available on the internet free of charge: www.quick-fds.com
RECOMMENDATION FOR USE
• Easy to use, containing only one component, it requires neither special training nor any
sophisticated application equipment.
• Dilution: can be used neat or diluted with water (between 5% and 15%) according to requirements
• Sensitive to frost
• The unused product should be stored at a temperature between 5°C and 25°C in a dry, well-
ventilated area
• Store in a frost-free place, can be kept for 18 months in the original, unopened packaging
• Keep all packaging tightly closed, carefully close after opening and keep upright
• Keep away from sources of ignition, heat and sunlight